/
Switch Monitoring

SecHard

Switch Monitoring

Owned by seda peker
May 03, 2024
2 min read

SNMP must be activated in Sechard > Settings > System > Monitoring > SNMP field. After it is activated, select which SW is desired to monitor in the Select Resources field. And we activate the SNMP v2 box.

 

image-20240502-071804.png

 

image-20240502-071818.png

The Community String value is copied.
Go to the relevant Switch from Resource > Resources. After entering the switch, go to "Management > Switch Config" page.

 

 

image-20240502-071844.png

Let's select the value and Access value as ro and Run.

image-20240502-071906.png

We get the output.

image-20240502-071931.png

After a short time, while in the switch in resource > resources, the fields in the Dashboard menus will start to come instantly. SecHard pulls data from the switch every 1 second and reflects it in real time.

 

image-20240502-071956.png

For more detailed demonstration, we need to log in to Grafana once. For this, go to Tools > 3rd Party > Grafana from Sechard left menus.

image-20240502-072019.png

Let's log in by coming to the login screen.

In the Dashboard area on the Switch, areas such as Interface Throughput will start reporting in real time and you can activate different reports.

image-20240502-072039.png

If you continue to see screens starting with N/A, it means that this Switch does not send this data from Snmp.

 

Related content

SecHard