In order for us to use the Alarm and Two Factor Auth features of the SecHard server, Relay permission must be granted via an email server. The following settings are made to enable the SecHard server to send e-mail.
Server Name: Enter the IP address of the mail server or the name of the FQDN.
Port: Please type the SMTP Port.
From Email ID: Please write the address where the Alarm or Two Factor Auth emails will be sent.
To Email ID: Write down to which address the alarms will go.
Authentication User Name: Enter the Authentication user name. (Optional)
Password: Enter the Authentication password. (Optional)
SSL Enabled: To enable SSL, check it. (Optional)
0 Comments